Skip to content
Prices Inc VAT Ex VAT

Basket

Your basket is empty.
Shop relays
Rako RAMPI
Rako RAMPI
Rako RAMPI
Rako RAMPI

Rako

Rako RAMPI

SKU RAMPI

The Rako RAMPI is a USB programming interface that lets a computer running Rako's RASOFT Pro software commission a Rako wireless (Rakom RF) system. It sends and receives Rako wireless messages and programs NFC devices, such as the RK-EOS-6 keypad and RCI interfaces, by holding it against them. It needs RASOFT Pro to operate.

Manufacturer: Rako
£198.00 inc VAT

Key features

Wireless
  • Programming interface for Rasoft Pro
  • USB to a wireless Rako system
  • Run from the keypad; the Rako app needs an RK-HUB or WK-HUB
Product details Manual
Got a Rako project? Need commissioning, a design, or help choosing wired, wireless or hybrid? Tell us about the house.

Why Rako RAMPI

Sends and receives Rako wireless messages and programs NFC devices, such as the RK-EOS-6 keypad and RCI interfaces, by holding it against them

Rasoft Pro

The commissioning tool. A computer running Rasoft Pro talks to the system through this interface.

Wireless

Sends and receives Rakom RF, so a laptop can address wireless modules and keypads.

For the installer

Used while the system is set up. The householder then runs the keypad, and the app if a Hub is fitted.

What the Rako RAMPI is

The Rako RAMPI is a USB programming device for Rako wireless systems and Rako NFC products. It has RF receive and transmit functions and bi-directional NFC, and replaces Rako's obsolete RAUSB. Rako describes it as a programming tool; everyday app and voice control come from the RK-HUB.

Where it sits in a Rako system

Plugged into a computer running RASOFT Pro, the RAMPI programs individual wireless modules such as the RMT-500, and wireless RAK systems controlled by an RX-LINK. Held against an NFC device, it programs keypads such as the RK-EOS-6 and interfaces such as the RCI-4L and RCI-7M. Its built-in receiver shows wireless commands in RASOFT Pro, which helps confirm programming. See all Rako wireless interfaces.

Power and connection

The RAMPI connects to a computer by USB. Rako offers USB-A and USB-C versions. It requires RASOFT Pro, available from rakocontrols.com. Rako's RAMPI instruction manual covers setup.

Guide: Rako RK-HUB vs WK-HUB: which hub for a wireless or wired UK system?

Questions

What software does the Rako RAMPI need?

RASOFT Pro, Rako's programming software. The RAMPI does not work without it.

Do I need a RAMPI if I have an RK-HUB?

Not necessarily. Rako's module manuals list either a RAMPI or a Hub as the RASOFT Pro communication device, and the Hub has its own NFC pad.

Can the RAMPI program NFC keypads?

Yes. It programs Rako NFC devices, including RK-EOS keypads and RCI-4L and RCI-7M interfaces, when held against them.

Does the RAMPI give me app control?

No. It is a programming tool. App and voice control need an RK-HUB.

Rako app

Scenes from the keypad, and from the phone

This product sits in a Rako system. The keypad on the wall runs the room. With an RK-HUB or WK-HUB, the same scenes also run from the free Rako app.

  • Room scenes from the keypad on the wall
  • App control once an RK-HUB or WK-HUB is on the network
  • Voice, timers and holiday mode from the Hub
Download on theApp Store Get it onGoogle Play

The Rako app is published by Rako, and needs an RK-HUB or WK-HUB with firmware 3.7.6 or later.